Glass Flake Epoxy Coating — High Build Protection for Steelwork in Karachi
Glass Flake Epoxy Coating is a high build industrial coating available at Saify Paint House, DHA Karachi. It is designed for steelwork that faces corrosion, abrasion and chemical exposure, including splash zones on marine structures. If you are protecting an industrial structure, you can compare it with our range of epoxy paints in Karachi.
The product is supplied as a kit of two parts: a 3 litre base and a 1 litre curing agent, making 4 litres in total. Both parts must be mixed in the correct ratio before use.
Why Choose a Glass Flake Epoxy
Steel exposed to seawater spray, chemicals or heavy abrasion needs a coating that is thicker and tougher than a standard paint. Glass flakes lie flat in the film and form a barrier that slows the path of moisture and corrosive agents to the metal. That is why glass flake epoxies are widely used on structures such as jetties, bridges and chemical plants.
Key Features
- High build: Designed for a dry film of 500 to 1000 microns in one job, depending on the number of coats.
- Glass flake reinforcement: Improves resistance to corrosion and abrasion.
- Low VOC: A high solids, low VOC formulation.
- Chemical resistance: Designed to resist chemically aggressive environments.
- Cathodic protection compatibility: The manufacturer states it is compatible with sacrificial anode and impressed current systems.
- Glossy finish: A smooth, glossy surface.
- Two colours: White and grey. A limited range of other colours is available on special order.
Recommended Applications
- Steelwork in splash zones of offshore and marine structures
- Jetties, decks and bridges
- Chemical plants and water treatment plants
- Pulp and paper mills
- Steel structures exposed to abrasion and corrosion
The product can also be used as part of a non-slip deck system, with a suitable aggregate. Check our Industrial Paints range for the other primers and topcoats that suit your structure.
Technical Information
- Mix ratio: 3 parts base to 1 part curing agent, by volume
- Volume solids: 86% ± 2% (mixed, unthinned)
- Theoretical coverage: 1.72 m² per litre at 500 microns dry film
- Working pot life: 4 hours at 10°C, 3 hours at 15°C, 1 hour at 25°C, 30 minutes at 40°C
- Touch dry: 8 hours at 25°C
- Hard dry: 18 hours at 25°C
- Overcoat: 18 hours minimum and 4 days maximum at 25°C
- Shelf life: 6 months at 25°C
Drying, curing and pot life depend on temperature, humidity and film thickness. Allow appropriate loss factors when estimating quantities.
Surface Preparation and Application
The steel must be clean, dry and free from oil, grease, rust and loose material before coating. Surface preparation affects performance more than any other step, so confirm the required preparation for your structure before you start.
Mix the complete kit at once, using a power agitator. Agitate the base thoroughly, then add the entire contents of the curing agent and mix again. Do not mix for long periods, because the heat generated shortens the pot life. Use the mixed material within its pot life.
Spray is the recommended method. For airless spray, use a tip of 0.92 to 1.09 mm, with at least 3000 psi at the tip. For air spray, use a pressure pot with the recommended gun and fluid tip. Brushing is suitable only for small touch-up areas, where a film of 100 to 200 microns can be achieved. Roller application is not recommended.
Do not leave mixed material in hoses or spray equipment. Flush all equipment with the cleaning solvent recommended for this product before work stops, and start again with freshly mixed kits after long stoppages.
Use only the epoxy thinner recommended for this product, up to 10% addition. Confirm the compatible undercoat with our team before application.
Safety Precautions
This product is flammable. Keep it away from sources of ignition, do not smoke near it, and take precautions against static discharge. Use it only in well-ventilated areas, and do not breathe in the vapour or spray mist.
Wear suitable protective clothing, goggles, a dust mask and gloves, and use barrier cream. Avoid contact with eyes and skin. In case of fire, use foam, carbon dioxide or dry chemical.
If the product splashes into the eyes, flush with warm water immediately and seek medical advice. For skin contact, wash thoroughly with soap and water or an approved industrial cleaner, and do not use solvents or thinners. If inhaled, move to fresh air. If swallowed, do not induce vomiting, and seek medical attention immediately. Read the safety data sheet before use.
Clean-Up
Clean all equipment immediately after use with the cleaning solvent recommended for this product. Flush equipment regularly during the working day, depending on the volume sprayed, the temperature and any delays. Dispose of surplus material and empty containers according to local regulations.
Buy Glass Flake Epoxy Coating in Karachi
Saify Paint House stocks industrial paints and protective coatings for customers across Karachi. Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi. You can also learn more about Saify Paint House, or browse our marine paint range if your structure is in a coastal or splash zone.
Because this is a two component product, please message us before ordering. We will confirm colour, stock, the correct undercoat and the quantity for your job. For pricing and availability, call 0333-5843610.




