Saify Paint House

Etch Wash Primer

,

Etch Wash Primer

Etch Wash Primer is a two pack pre-treatment primer for aluminium, galvanised metal and metal spray. It gives paint systems a firm bond to difficult metal surfaces. Sold as a 4 L base and 4 L activator kit.

Get Price on WhatsApp

Etch Wash Primer — Metal Pre-Treatment in Karachi

Etch Wash Primer is a two pack pre-treatment primer available at Saify Paint House, DHA Karachi. It is designed to prepare aluminium, galvanised metal and metal sprayed surfaces before the main paint system goes on.

The product is supplied as a kit: 4 litres of base and 4 litres of activator, 8 litres in total. Mix the two parts thoroughly before use.

Why Use an Etch Wash Primer

Aluminium and galvanised surfaces are smooth and resist paint. An etch wash primer contains an acid pre-treatment that prepares the metal so the coats that follow bond properly. It is a pre-treatment layer, not a thick finish.

Key Features

  • Adhesion to difficult metals: Prepares aluminium, galvanised metal and metal spray for subsequent coatings.
  • Two pack system: Base and activator are mixed before application.
  • Acid pre-treatment: Contains phosphoric acid to etch the metal surface.
  • Corrosion-inhibiting pigments: Contains zinc chrome pigments.
  • Thin film: Designed for an 8 to 10 micron dry film.
  • Spray application: Conventional spray is the recommended method.
  • Semi-translucent yellow: A matt finish that shows coverage during application.

Technical Information

  • Volume solids: 12 ± 2%
  • Theoretical spreading rate: 10 m² per litre per coat at 10 microns
  • Pot life: 4 hours after mixing
  • Touch dry: 10 minutes at 40°C, 30 minutes at 20°C, 40 minutes at 10°C
  • Dry to handle: 45 minutes
  • Recoat interval: 2 hours minimum, 3 days maximum
  • Full cure: 2 days at 20°C
  • Shelf life: 6 months

Drying and recoat times depend on temperature, humidity and film thickness. Check the manufacturer’s data sheet for your job conditions.

Recommended Applications

  • Aluminium surfaces before painting
  • Galvanised steel before painting
  • Metal sprayed surfaces
  • Pre-treatment before industrial enamel or epoxy systems

Surface Preparation and Application

The surface must be dry, clean and free from oil, grease and other contamination. It should be smooth and sound. Do not apply to damp or condensing surfaces, or below 10°C.

Stir the base thoroughly, add the activator, and keep stirring until fully mixed. Apply a thin, even coat over the whole surface. Do not build up a thick coat, because a wash primer is much less effective at normal paint thickness. Keep the dry film between 8 and 10 microns, and no more than 12 microns.

Spray with a 0.40 to 0.50 mm tip at about 2000 psi, or use air-mix or airless spray. Recoat within 2 hours to 3 days, depending on conditions. Overcoat within the recoat window so the topcoat bonds properly.

Safety Precautions

The product is for professional use. Use it only in well-ventilated areas, and provide adequate ventilation in confined spaces. Wear suitable protection, and avoid contact with eyes and skin. Keep the container closed when not in use, and do not transfer contents to other containers.

The product contains crystalline silica. Sanding or abrading the dry film can release silica dust, which causes lung damage and cancer with long-term exposure. Use a NIOSH-approved particulate respirator when sanding, and follow the manufacturer’s safety data sheet.

Do not take internally. Keep out of reach of children. In case of eye contact, flush with plenty of water and seek medical attention if irritation persists.

Clean-Up

Clean spills, spatters and tools immediately after use with the epoxy thinner specified for this product. Flush spray equipment afterwards to prevent rust.

Buy Etch Wash Primer in Karachi

Saify Paint House stocks industrial paints and protective coatings for customers across Karachi. Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi.

For pricing and availability, message us on WhatsApp or call 0333-5843610.

Get Price on WhatsApp

Scroll to Top