Anti Mosquito Coating — Satin Interior Paint in Karachi
Anti Mosquito Coating is a satin interior coating available at Saify Paint House, DHA Karachi. The manufacturer describes it as a smooth, luxurious interior finish with mosquito-repellent properties, and it is designed for interior walls. You can compare it with other interior paints in Karachi we stock.
The coating is available in four colours: Ash White, Off White, Lavender White and Cameo.
Why Choose a Satin Interior Coating
A satin finish sits between matt and gloss. It has a soft sheen that is easier to wipe clean than matt paint, and it suits living rooms, bedrooms and other interior walls that see daily use.
Key Features
- Satin finish: A smooth, soft sheen for interior walls.
- Mosquito-repellent properties: The manufacturer describes the coating as having mosquito-repellent properties.
- Quick drying: Dry to touch in about 30 minutes, with a recoat interval of 6 hours minimum.
- Low odour: The manufacturer states a low odour, allowing faster re-occupation of the room.
- Colour retention: The manufacturer states excellent colour retention.
- No added lead or mercury: As stated by the manufacturer.
- Four colour options: Ash White, Off White, Lavender White and Cameo.
Available Colours
Anti Mosquito Coating is available in Ash White, Off White, Lavender White and Cameo. Mention your preferred colour when you send your WhatsApp enquiry so we can confirm stock. You can also browse our full decorative paint range.
Technical Information
- Finish: Satin
- Volume solids: 38 ± 2%
- Dry to touch: 30 minutes
- Dry film thickness: Up to 25 microns
- Wet film thickness: Up to 50 microns
- Theoretical spreading rate: 10 to 11 m² per litre per coat
- Thinning: Ready for use. If dilution is needed, add up to 5% clean water. For conventional spray, add up to 10% water.
- Recoat interval: 6 hours minimum
Actual coverage depends on the application method, surface roughness and porosity. Drying and recoat times depend on temperature, humidity and film thickness.
Recommended Applications
- Interior walls in living rooms and bedrooms
- Interior walls in offices and commercial spaces
- Interior surfaces that need a washable, satin finish
For a different wall finish, see our interior wall textures.
Surface Preparation and Application
Wash the surface with water and remove loose matter by brushing or scrubbing. Treat the surface with an anti-fungus solution and leave it for 8 hours. Wash the surface again to remove the dead growth, then allow it to dry thoroughly.
Apply one coat of latex primer, then two coats of Anti Mosquito Coating. Apply at temperatures above 10°C (50°F).
For brush or roller, use a nylon or polyester brush, or a 3/8″ to 3/4″ nap synthetic roller cover. For spray, use conventional spray or air-mix or airless spray.
Clean-Up
Clean spills, spatters, hands and tools immediately with soap and warm water. Flush spray equipment with mineral spirits to prevent rust. Follow the manufacturer’s safety recommendations when using mineral spirits.
Safety Precautions
Handle with care. Read all safety labels on the packaging before and during use. Follow local and national safety regulations, and refer to the manufacturer’s safety data sheet.
Buy Anti Mosquito Coating in Karachi
Saify Paint House stocks interior paints and specialty coatings for customers across Karachi. Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi. Learn more about Saify Paint House, or browse our Industrial Paints range if you need protective coatings.
For pricing and availability, message us on WhatsApp or call 0333-5843610.




