Alkyd Camouflage Paint — Matt Industrial Coating in Karachi
Alkyd Camouflage Paint is a matt alkyd coating available at Saify Paint House, DHA Karachi. It is designed for general factory and plant maintenance, including tank storage facilities, towers, cranes, silos and process plants. The manufacturer recommends it for inland and mild industrial conditions, and for coastal environments.
If you are choosing a protective finish for industrial equipment, you can compare it with our range of specialty industrial paints in Karachi.
Why Choose an Alkyd Matt Coating
Alkyd resins give a tough, durable film with good weathering resistance. A matt finish is non-reflective, which suits plant areas, equipment and structures where glare is a concern and a subdued appearance is preferred. The coating is designed for maintenance work on existing steelwork and equipment.
Key Features
- Matt finish: A non-reflective surface for industrial equipment and structures.
- Alkyd resin base: Provides durability and weathering resistance.
- One component: Ready to use, with no mixing required.
- Four colours: Clifton Sand, MB Green, Beige and Black.
- Suitable for maintenance: Designed for plant and factory maintenance programmes.
Available Colours
Alkyd Camouflage Paint is available in Clifton Sand, MB Green, Beige and Black. Mention your preferred colour when you send your WhatsApp enquiry so we can confirm stock. You can also see our full Industrial Paints range.
Technical Information
- Finish: Matt
- Volume solids: 37% ± 2%
- Weight solids: 60% ± 2%
- Theoretical spreading rate: 13 m² per litre per coat at 25 microns dry film
- Dry film thickness: 25 microns per coat
- Wet film thickness: 65 microns per coat
- Number of coats: Two
- Dry to touch: 12 hours at 10°C, 8 hours at 20°C, 6 hours at 40°C
- Recoat interval: 16 hours minimum
- Flash point: 34°C
- Shelf life: 12 months
Actual coverage depends on the application method, surface roughness and porosity. Drying and recoat times depend on temperature, humidity and film thickness.
Recommended Applications
- Storage tanks and tank farms
- Towers, silos and process vessels
- Cranes and plant structures
- General factory and plant maintenance
Because the manufacturer recommends a zinc phosphate primer under this coating, speak to our team about the right primer for your surface. For coastal or splash-zone structures, see our marine paint range.
Surface Preparation and Application
The surface must be power-tool cleaned to at least SSPC-SP2 or St 2 (ISO 8501-1:1988), and free from mill scale. It must be dry and free from dirt, grease, oil and other contaminants before painting.
Apply a zinc phosphate primer first, then two coats of Alkyd Camouflage Paint. The product can be applied by brush or roller, by conventional spray, or by airless spray. For airless spray, use a tip of 0.017 to 0.020 inches at about 110 psi.
Do not apply the paint when the humidity is above 85%, or when the air or surface temperature is below 5°C. Do not mix it with other paints, organic solvents or powder materials. Apply only at temperatures above 10°C (50°F). Allow at least 16 hours between coats.
Storage
Store the product in a dry, shaded place away from direct sunlight, at an ambient temperature above 0°C. It has a shelf life of 12 months.
Clean-Up
Clean spills, spatters, hands and tools immediately with the thinner recommended for this product. After cleaning, flush spray equipment with mineral spirits to prevent rust. Follow the manufacturer’s safety recommendations when using mineral spirits.
Safety Precautions
This product is flammable, with a flash point of 34°C. Keep it away from heat and ignition sources, and provide adequate ventilation during application and drying. Avoid breathing spray mist, and avoid contact with skin and eyes. Read all safety labels on the packaging before and during use, and refer to the manufacturer’s safety data sheet.
Buy Alkyd Camouflage Paint in Karachi
Saify Paint House stocks industrial paints and protective coatings for customers across Karachi. Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi. You can also learn more about Saify Paint House, or browse our epoxy paints if you need a more demanding finish.
For pricing, pack sizes and availability, message us on WhatsApp or call 0333-5843610.




