Saify Paint House

Wave Penetration RF Radar Coating

,

Wave Penetration RF Radar Coating

Wave Penetration RF Radar Coating is a specialised, two-component (2K) acrylic-polyurethane coating formulated for applications requiring radio frequency (RF), microwave and radar wave transmission. Its non-conductive, low-dielectric formulation is designed to minimise signal attenuation across frequencies ranging from 24 GHz to 81 GHz and above.

Featuring a low-viscosity formulation, excellent substrate adhesion and resistance to UV exposure, chemicals, salt spray and harsh weather conditions, it is suitable for radar sensor covers, antenna housings, composite structures and RF equipment enclosures.

Get Price on WhatsApp

Wave Penetration RF Radar Coating — Advanced RF Transparent Protective Coating in Karachi

Wave Penetration RF Radar Coating is a specialised, high-performance, two-component (2K) acrylic-polyurethane coating designed for applications requiring radio frequency, microwave and radar wave transmission. Its non-conductive, low-dielectric formulation is engineered to allow electromagnetic waves to pass through coated surfaces with minimal signal attenuation.

Designed for advanced electronic, automotive, aerospace, telecommunications and industrial applications, this coating combines RF transparency characteristics with protective surface performance. Its solvent-based formulation provides resistance against UV degradation, chemical exposure, salt spray and harsh environmental conditions.

The coating is suitable for properly prepared composite, fiberglass, carbon fibre, polycarbonate, ABS and polyolefin substrates. Contact Saify Paint House for product specifications, availability and technical enquiries.

Explore our range of industrial paints and specialised protective coatings in Karachi.

Why Choose Wave Penetration RF Radar Coating?

Conventional coatings containing metallic or conductive pigments can interfere with electromagnetic signal transmission. Wave Penetration RF Radar Coating uses a non-conductive formulation with low-dielectric organic pigments, designed for applications where maintaining RF and radar signal transmission is important.

Its specialised formulation is designed for frequencies between 24 GHz and 81 GHz and above, making it suitable for applications involving radar sensors, RF equipment housings, antenna covers and other electromagnetic transmission components.

Key Features

  • RF and Radar Wave Transparency: Formulated for applications involving radio frequency, microwave and millimetre-wave radar transmission across 24–81+ GHz frequencies.
  • Low-Dielectric Formulation: Designed with non-conductive organic pigments to minimise interference with electromagnetic signal transmission.
  • Low Signal Attenuation: The technical datasheet specifies radar signal attenuation below 1.0 dB at the target dry film thickness under specified conditions.
  • Non-Conductive Composition: Contains no aluminium flakes, metallic effect pigments or conductive carbon black.
  • Weather Resistance: Formulated to provide protection against UV exposure, chemical contact, salt spray and harsh weather conditions.
  • Water-Repellent Surface: Forms a highly non-porous cured film designed to resist moisture ingress.
  • Substrate Compatibility: Suitable for properly prepared composites, fiberglass, carbon fibre/epoxy, polycarbonate, ABS and polyolefin surfaces.
  • Two-Component System: A 2K acrylic-polyurethane formulation designed for specialised industrial applications.

RF and Radar Applications

Wave Penetration RF Radar Coating is designed for specialised applications where protective surface coatings must accommodate electromagnetic wave transmission.

  • Automotive and ADAS: Radar sensor covers, bumper grilles, vehicle emblems and autonomous driving radar enclosures.
  • Aerospace and Aviation: Aircraft radomes, antenna fairings and flight telemetry covers.
  • Telecommunications: 5G antenna covers, wireless repeater enclosures and outdoor RF equipment housings.
  • Military and Defence Equipment: Radar covers, communication equipment housings, UAV sensor pods and satellite communication domes.
  • Maritime Applications: Marine navigation radar enclosures, satellite tracking dome covers and offshore communication housings.

Available Colours and Finishes

Wave Penetration RF Radar Coating is available in the following colour options:

  • Translucent Clear: Clear coating for applications requiring a transparent appearance.
  • Pink (S04*33 / BS 04 C 33): Specialised pink shade.
  • Custom Shades: Custom colour options may be available on request.

Colour selection and coating thickness should be considered alongside the intended RF transmission requirements.

Technical Information

  • Product Type: RF and Radar Wave Transmission Coating
  • Resin System: Acrylic-Polyurethane
  • Formulation: Two-Component (2K)
  • Base: Solvent-Based
  • Components: Two
  • Volume Solids: 45% ± 3%
  • Dielectric Constant (εr): Below 2.80 at 77 GHz
  • Loss Tangent (tan δ): Below 0.015 (ASTM D150 reference)
  • Specified Radar Signal Attenuation: Below 1.0 dB at target DFT
  • Recommended Dry Film Thickness: 25–35 microns (must not exceed 35 microns)
  • Target Frequency Range: 24 GHz to 81 GHz and above
  • Colour: Translucent Clear, Pink and Custom Shades

Important: Dry film thickness is critical to RF and radar transmission performance. The total coating thickness must remain within the specified 25–35 micron range and must not exceed 35 microns. Excessive coating thickness may cause radar wave reflections and sensor errors.

Compatible Surfaces

The coating is designed for application on properly prepared non-metallic and composite substrates, including:

  • Fiberglass (GRP)
  • Carbon fibre and epoxy composite materials
  • Polycarbonate
  • ABS plastic
  • Polyolefin surfaces
  • Other suitable composite substrates

For untreated polypropylene (PP), EPDM or ABS surfaces, a suitable non-conductive plastic adhesion primer may be required.

Mixing Ratio and Application

Wave Penetration RF Radar Coating is a two-component system that requires accurate mixing before application.

Recommended Mixing Ratio (By Volume):

  • Component A: 2 parts
  • Component B: 1 part
  • Thinner: 10–15% maximum using a compatible 2K solvent thinner to achieve the required application viscosity.

Surface Preparation

Proper surface preparation is essential for achieving good adhesion and coating performance.

  • Step 1 – Surface Cleaning: Thoroughly clean and degrease plastic or composite surfaces using a suitable anti-static plastic cleaner.
  • Step 2 – Adhesion Primer: Apply a thin layer of non-conductive plastic primer, approximately 5–10 microns, when coating untreated PP/EPDM or ABS substrates.
  • Step 3 – Mixing: Mix Component A and Component B in the specified 2:1 volume ratio.
  • Step 4 – Thinning: Add compatible 2K solvent thinner up to 10–15% maximum, as required for application viscosity.
  • Step 5 – Application: Apply using a suitable gravity-feed or HVLP spray gun, maintaining the recommended coating thickness.

Spray Application Parameters

The recommended spray application settings are:

  • Nozzle Size: 1.2–1.3 mm.
  • Gravity Feed Spray Pressure: 1.8–2.0 bar.
  • HVLP Spray Pressure: 1.5–1.8 bar.
  • Recommended Application: 1.5 to 2 coats.

Critical Application Notice: Total dry film thickness must remain below 35 microns. Excessive coating buildup can cause radar wave reflections and sensor errors. Film thickness should be measured and controlled during application.

Drying and Curing Time

The technical datasheet specifies the following drying and curing schedule:

  • Dust Free: 5–15 minutes.
  • Tack Free: 15–45 minutes.
  • Ready for Assembly: 30 minutes to 12 hours.
  • Full Chemical Cure: 7 days.
  • IR Curing: 15 minutes.

Actual drying and curing times may vary depending on environmental conditions, application thickness and curing method.

Storage and Shelf Life

  • Store in tightly sealed original containers.
  • Recommended storage temperature: 5°C to 30°C.
  • Shelf life: Up to 12 months under recommended storage conditions.
  • Never store the product above 40°C.
  • Keep away from direct heat sources and unsuitable storage conditions.

Safety Precautions

  • Wear suitable rubber gloves and safety goggles during handling and application.
  • Ensure proper ventilation, particularly when working in enclosed areas.
  • Avoid inhaling vapours and spray mist.
  • Avoid direct contact with skin and eyes.
  • In case of skin contact, wash thoroughly with plenty of water.
  • In case of eye contact, immediately rinse with clean water and seek medical advice.
  • Do not smoke during application.
  • Keep out of reach of children.

Always follow the relevant safety data sheet and applicable workplace safety requirements when handling solvent-based two-component coatings.

Technical Performance and Testing Requirements

The stated dielectric properties and radar signal attenuation values are technical specifications provided under controlled conditions. Actual performance can vary depending on operating frequency, substrate composition, surface preparation, application equipment, film thickness and the complete coating system.

Independent testing under actual production and operating conditions is essential before commercial use. The suitability of the coating should be verified for the specific radar, RF or sensor application.

Buy Wave Penetration RF Radar Coating in Karachi

Saify Paint House supplies specialised industrial paints and protective coating solutions for customers across Karachi.

For technical information, product availability and pricing of Wave Penetration RF Radar Coating, contact our team directly.

Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi.

For product enquiries and technical assistance, message us on WhatsApp or call 0333-5843610.

Get Price on WhatsApp

Scroll to Top