Saify Paint House

Self Levelling Epoxy Floor

,

Self Levelling Epoxy Floor

A seamless epoxy floor that levels itself as it goes down. Self Levelling Epoxy Floor is a two-part epoxy binder, supplied with graded silica aggregate, built for warehouses, corridors and busy industrial floors that take daily wear and chemical spills.

Get Price on WhatsApp

Self Levelling Epoxy Floor — Seamless Industrial Flooring in Karachi

Self Levelling Epoxy Floor is a two-part epoxy binder system available at Saify Paint House, DHA Karachi. It is supplied with a graded silica aggregate, which is mixed in before the floor is laid. The result is a seamless surface that spreads and levels as it is worked, leaving no joints for dirt to collect in. If you are planning a floor for an industrial or commercial space, you can compare it with our epoxy paints in Karachi.

The kit contains 4 kg of part A, 1 kg of part B and 5 kg of graded silica aggregate. Mix the two parts first, then add the aggregate in the correct ratio.

Why Choose a Self Levelling Epoxy Floor

A standard floor paint wears through under trolleys, forklifts and foot traffic. A self levelling epoxy floor is thicker, harder and more resistant to both abrasion and chemicals. It also cleans easily, which matters in areas where hygiene and spill control are part of the daily routine.

Key Features

  • Seamless finish: One continuous surface with no joints to trap dirt.
  • Solvent-free: 99% solids by weight and by volume.
  • Built to take wear: Designed to withstand heavy traffic and mechanical wear.
  • Chemical resistance: Rated excellent for chemical resistance by the manufacturer.
  • Strong under load: Compressive strength greater than 55 N/mm² (BS 6319) and flexural strength greater than 33 N/mm² (ASTM D2370).
  • Heat resistance: Up to 140°C in dry conditions.
  • Low gloss: A finish below 80 gloss units at 60°.

Recommended Applications

  • Warehouses and storage areas
  • Corridors and public buildings
  • Laboratories and power plants
  • Indoor areas with heavy traffic and exposure to chemicals

This system is for indoor use. The manufacturer does not recommend it for outdoor exposure. Before the floor is laid, the concrete may need repair or levelling. See our building care and maintenance range. You can also browse our full Industrial Paints range.

Technical Information

  • Mixing ratio: 4 parts A, 1 part B, 5 parts aggregate, by weight
  • Dry film thickness: 1 to 2 mm
  • Wet film thickness: 1 to 2 mm
  • Spreading rate: 1.75 to 3.5 kg per square metre
  • Specific gravity: 1.75 ± 0.04
  • Pot life: 30 to 45 minutes at 25°C
  • Dry to touch: 8 to 10 hours at 10°C, 5 to 7 hours at 25°C, 4 to 5 hours at 40°C
  • Dry to handle or light traffic: 48 hours at 10°C, 36 hours at 25°C, 24 hours at 40°C
  • Full cure: 7 days

Drying times are based on 50% relative humidity. Coverage depends on the surface, so check it on site before ordering.

Surface Preparation and Application

Start with sound concrete that is at least 28 days old, with moisture content of no more than 4%. The surface must be clean and dry, and free from laitance, loose particles, oil, grease, curing compounds and other contaminants. Prepare it mechanically, using blast cleaning or grinding.

Apply an epoxy floor primer first. Then mix parts A and B thoroughly, add the graded aggregate gradually, and mix until the material is uniform. Pour the mixture onto the primed surface and spread it to the required thickness with a steel trowel or gauge rake. Work within the 30 to 45 minute pot life. Roll the surface straight away with a spiked roller to release trapped air and leave a smooth finish.

Do not apply below 10°C, when relative humidity is above 85%, or within 3°C of the dew point.

Safety Precautions

Use the product in well-ventilated conditions. Avoid breathing vapour or dust, and avoid contact with skin and eyes. Wear suitable gloves and eye protection. Wash spills from the skin with soap and water. If the product splashes into the eyes, flush them with plenty of water and seek medical attention immediately.

Store the containers in a dry, cool, well-ventilated place, away from heat and ignition sources, with the lids tightly closed. Keep out of reach of children. Read the safety data sheet before use.

Buy Self Levelling Epoxy Floor in Karachi

Saify Paint House stocks industrial paints and protective coatings for customers across Karachi. Visit our Badar Commercial store at Shop #2, Plot 31-E, 7th Street, DHA Phase 5, or our Gizri store at Shop #2, Al Raheem Center, Main Gizri, opposite Mubarak Masjid, DHA Karachi. You can also learn more about Saify Paint House.

Please message us before you order. We will confirm the colour, stock, the right primer for your slab and the quantity for your area. For pricing and availability, call 0333-5843610.

Get Price on WhatsApp

Scroll to Top