Building Care & Maintenance

Your One-Stop Shop for Building Protection: Waterproofing & Maintenance Solutions

Ensure the longevity and functionality of your building with our extensive range of high-quality waterproofing and maintenance materials. We cater to a variety of construction and renovation needs, offering solutions to address common building issues.

Silmix

Silmix is water-based emulsion of alkoxy silane / siloxane used for water resistance treatment of plaster, screed, and mortar.

Ressi SBR 5850 (SBR Chemical)

SBR Chemical is a ready-for use aqueous dispersion of a styrene-butadiene co-polymer with high stability against electrolytes. It contains anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5850 is a Material of Very high solids and is SBR emulsion of its purest form.

Water Guard 491

Waterproofing Membrane is a two-component polymer modified highly flexible cementitious product. It is an eco-friendly waterproof coating for the protection of concrete and mortar. It provides excellent adhesion, flexibility, crack bridging ability and durability. Water Guard 491 can be applied to various cementitious surfaces in marine structures, basement waterproofing, bathrooms, wet area waterproofing, swimming pools, roof waterproofing and water tanks, respectively. Water Guard 491 is also suitable for potable water retaining structures and drainage culverts.

Silblock

Silblock is a solvent-free siloxane/alkoxysilane emulsion in water. The product is suitable as an impregnating agent for masonry, including highly alkaline surfaces. It demonstrates good penetration into a variety of absorbent mineral building materials.

Water Guard 3020N (Elastomeric Waterproofing)

Water Guard 3020N is a One Component acrylic co-polymer based flexible waterproofing system ideal for use on cementitious and metal surfaces. Elastomeric Waterproofing is suitable for many waterproofing applications, such as swimming pools, balconies, bathrooms, wet areas, basements, roof water, roof waterproofing system in damp conditions, where other systems cannot be used, such as lift pits etc.

Water Guard P 200

Water guard P200 is a powder-based cement additive to make waterproof mortar and concrete. it provides integral waterproofing of all concrete and cementitious-based systems. It also reduces permeability, absorption of efflorescence. It provides long term concrete and mortar durability. It is also a great shrinkage reducing agent for concrete and mortars.

Water Guard Crysta Coat 101

Water Guard Crysta Coat 101 is a cementitious slurry waterproofing system by crystallization. The active chemicals in the applied Crystalline Waterproofing Coating reacts with the free lime and moisture present in the capillary track in the concrete to form an insoluble crystalline complex. The crystals block the capillaries and minor shrinkage cracks in the concrete to prevent any further water ingress.

Water Guard 5010

Water Guard 5010 is a two-component polymer modified flexible cementitious product. It is an eco-friendly waterproof coating for the protection of concrete and mortar. It provides good adhesion, flexibility, crack bridging ability and durability.

Damp Seal

Damp Seal is an epoxy-based dampness protective coating over masonry, cementitious surfaces, wood, and metal. It is an ideal epoxy coating sealer for the protection of surfaces against moisture and corrosion. Damp Seal is ideal for areas with rising dampness of water from natural ground level.

Paint Guard 10,000 C

Paint Guard 10,000 C is cement-based waterproof thin applied plaster which is ideal for use on concrete / Plastered walls and ceilings. It fills fine pores of plaster and concrete and provides a smooth and dry surface essential for painting. Paint Guard 10,000 C is an ideal fine plaster to be used in combination with Ressi PlastoRend 120, Insulaster or any other plaster material by Ressichem Prior to finishing it for paint.

Crack Heal 910

Crack Heal 910 is a high-quality filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of concrete and plasters.

Crack Heal 910 2K

Crack Heal 910 2K is a high quality semi flexible filler material for filling the chipping of service conduits for electric, plumbing and gas lines on masonry and concrete masses. It can also be used to fill out large holes and levelling uneven surfaces of vertical concrete and plasters.

Crack Heal 920

is a high-quality filler material for the filling of static cracks, holes and levelling uneven surfaces on concrete and plaster.

Crack Heal 920 2K

is a high quality two component filler material for the filling of static cracks, holes and levelling uneven surfaces on concrete and plaster.

Crack Heal 930

is a gypsum based quick set joint and crack filler which can easily be used to fill out cracks of various nature up to a thickness of 10mm. Crack Heal 930 is ideal for the cracks and joints of masonry, plaster, gypsum plaster, gypsum boards and cement boards.

Crack Heal 940

is a three-component epoxy-based crack and joint filler which can be used to fill cracks and joints of cementitious surfaces, metal surfaces, gypsum boards, cement boards and wood surfaces. It is an ideal material where a strong ad rigid joint filling of crack is required.

Crack Heal Flexi 950

is a single component ready to use acrylic based crack and joint filler, Crack Heal Flexi 950 is suitable for filling cracks, joints, and voids on most types of absorbent surfaces such as plaster, wood gypsum, asbestos etc. Crack Heal Flexi 950 is suitable for fixing crack up to 4mm wide.

Wall Guard 11,000 G

is a lightweight plasterboard joint filler, putty and finishing material formulated for easy mixing with water, application, and sanding. The product also be used for many other internal applications where filling works using a gypsum-based binder may be required.

Tough Guard 12,000 E

Is a three-part epoxy putty and crack filler based on epoxy resin, hardener, and filler. Simply mix the premeasured Part A, B and C by hand or drill stirring. This impact resistant epoxy putty and crack filler can be applied from feather edge to several inches thick in one application.

Water Guard 247

is a single component bitumen emulsion protective coating. It dries to form a black and tough protective coating. It is used as a damp proofing, protective coating for rafts, underground structures, civil structures, precast panels, pipes, etc.

Water Guard 247 Plus

is a rubber modified bitumen emulsion; it dries to form a black, flexible coating. Water Guard 247 Plus is used as a damp proofing, protective coating for rafts, underground structures, civil structures, wet area waterproofing. etc. it can also be used as a waterproofing coat and a curing.

Silprime 3K

is a three-component system used for heavy duty protection against atmospheric corrosion and used as a damp proof membrane.

Ressi SBR 5840

is ready for use aqueous dispersion of a styrene-butadiene co-polymer with stability against electrolytes. It contains an anionic/non-ionic emulsifier system and is free from film forming aids, solvents, plasticizers, and ammonia. Ressi SBR 5840 is primarily designed to meet the cost constraints of projects. It is a dilution of pure SBR emulsion in water modified with a thickener.

Stone Guard

is a Solvent-Based, Higher alkylated alkoxy siloxane & Fluro carbons resin-based product, suitable as an impregnating agent for masonry to have easy to Clean properties. It demonstrates deep penetration into a variety of absorbent mineral building materials.

Patch 365

is a dry premix repairing mortar useful for the repairing of old deformed plaster works, damaged floor screed with potholes and concrete where surface honeycombing has occurred. Patch 365 is also highly recommended for the use in refurbishment & renovation works.

Patch 365 Plus

is a two-component dry premix repairing mortar useful for the repairing of old deformed plaster works, damaged floor screed with potholes and concrete where surface honeycombing has occurred. Patch 365 Plus is also highly recommended for the use in refurbishment & renovation works. Patch 365 Plus is extremely useful for areas where high strength, water resistivity and some flexibility is required in the mortar

Patch Epoxy 111

is a three component, solvent free epoxy resin, high strength mortar. It is a high strength material with no shrinkage. It is suitable as a bedding for repair of both horizontal and vertical surfaces. It is ideal for industrial walls and floors, cracks arising in roads, bridge decks, patch repair works, airport runways, sidewalks, parking floors, precast units, manhole benching etc.

Rapid Patch 999

is a ready to use dry premix quick set repair mortar used for the repairing of old deformed plasterworks, damaged floor screed with potholes and concrete where surface honeycombing has occurred. Rapid patch 999 is highly recommended for the use in refurbishment works where quick dry mortars are required for smaller jobs.

Heat Guard 1000

is a single component high heat resistant reflective and waterproof coating which has been designed to dissipate and reflect solar radiation by providing a protective coating. Heat Guard 1000 is applicable on a variety of substrates such as concrete, blocks, bricks, plaster and screeds, and a variety of shaded metal roofs. Heat Guard 1000 had added glass beads aggregates embedded into it which can reflect heat off the surface to a great extent.

Water Guard Crysta Coat 102

is a cementitious economical slurry waterproofing system by crystallization. The active chemicals in the applied Water Guard Crysta Coat 102 reacts with the free lime and moisture present in the capillary track in the concrete to form an insoluble crystalline complex. The crystals block the capillaries and minor shrinkage cracks in the concrete to prevent any further water ingress.

Water Guard Crysta Admix 103

Water Guard Crysta Admix 103 is a high quality, integral and high concentrated waterproofing admixture for concrete and mortars. By reaction with the cement paste it forms nanocrystals. In the cement matrix Water Guard Crysta Admix 103 is reducing the capillary and pore size. The formed crystal structure is not soluble. Water Guard Crysta Admix 103 forms in combination with concrete an integral waterproofing system for all concrete construction

Ressi Swell Bar Pro 60

Ressi Swell Bar Pro 60 Zepoxy Tabletop Deep Pour is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.